ML2000 Panel for Engine Controls

PowerVision for Controllers

PowerVision For Controllers is a simplified version of the PowerVision Configuration Studio^® PC-based software program suite used to configure controllers and displays. This version lets you create customized configurations for controllers such as the MPC-20, MPC-10 and TEC-10 without needing to know how to write code. It is freely available to anyone that wants to configure a Murphy by Enovation Controls controller.

Downloads:

• PowerVision for Controllers Downloads (Account Required)
  
  • Downloads of PowerVision for Controllers are only available on this site to users with registered accounts. To register for a free account, click here. Having trouble accessing your account? Contact Account Support.
• PowerVision for Controllers Tutorial

• Solid Models
  • ML2000 Panel (STEP)

No compliance documents or certificates are available at this time.

No application information is available at this time.

• Pinouts Quick Guide
• Application Drawing (00-02-0970, rev 07/15)
• Custom Solutions Brochure (1411595; revision date: 03/2016)
• Magnetic Pickup Installation Instructions (00-02-0181)

• PowerCore Video Guides
• PowerVision for Controllers Tutorial

• Key Switch Removal and Installation
• Connector kits, EMEA regions (ys6475)

• Interface:
  • Display:
    • Monochrome Transflective LCD
    • 3.8 in./ 96.5 mm, QVGA (320 x 240 pixels)
    • Languages: English, Spanish, German, French, Italian
  • (3) LEDs: green (mode), yellow (warning) and red (shutdown)
  • Operator controls:
    • (11) Raised silicone keypads, tactile feedback
    • (1) Rotary key switch, power on/off
      
    • (1) AGC Fuse, 20A
• Power Supply:
  • Operating Voltage: 8-32 VDC
  • Standby Current: 220mA @12 VDC, 255mA @ 24VDC
• Inputs (15):
  • (6) Digital, configurable (active on High, Low, Open)
  • (8) Analog, configurable (4-20 mA, 0-5V, resistive or digital ground)
  • (1) Frequency, supporting: Magnetic pickup (30 Hz - 10 kHz, 2.0 VAC-120 VAC) and Engine Alternator (30 Hz - 10 kHz, 4.5 VRMS - 90 VRMS)
• Outputs (16):
  • (2) Relay, Form C (dry / volt-free), 10A
  • (1) Relay, NO/NC (+DC), 10A
  • (1) Relay, NO/NC (-DC), 10A
  • (2) Relay, NO (+DC), 10A, (Reserved for Crank & Fuel/ECU Enable)
  • (2) Low-side FET (–DC), 1A
  • (2) High-side FET (+DC), 2A
  • (2) +5VDC, 200mA
  • (1) 0-5VDC Analog
  • (1) Dedicated Alternator Excitation (+DC)
  • (1) Sender Common (-DC)
  • (1) Sender Return (+DC)
• Communications:
  • (1) CAN: J1939
  • (1) RS485: Modbus RTU
  • (1) USB: Programming
• Connectors:
  • 21pin, Deutsch HDP24-24-21PE
  • 31pin, Deutsch HDP24-24-31PE
• Mating Connectors:
  • 21 Position, Deutsch HDP26-24-21SE
  • 31 Position, Deutsch HDP26-24-31SE
• Physical/Environmental:
  • Enclosure Material:
  • ML2000-4X, Polycarbonate NEMA 4 (UL Certified)
  • ML2000, Powder Coated Cold Rolled Steel
  • Dimensions (WxHxD):
    • ML2000-4X, 8.21 x 7.46 x 2.26 in. (208.7 x 189.7 x 57.5 mm)
• IP rating: ML2000-4X, IP66
• Operating Temperature: -40° to +85°C (-40° to 185°F)
• Storage Temperature: -40° to +85°C (-40° to 185°F)
• Mounting: 4 isolated .75 inch rubber shock mounts
• Shipping Weight: N/A
• Shipping Dimensions: 15 x 15 x 11 in. (381 x 381 x 279.4 mm)