Example Configurations

These examples are provided to demonstrate how to accomplish various tasks in Powervision. Many of these are created in response to user questions, if you need an example please review this list and if you do not find what you are looking for please submit a request for an example by selecting "submit a Request". Please note these examples have been tested and are functional but it is up the user to perform final validation testing in your configuration and application environment. Please continue to visit this page as new examples are added on a regular basis.

NEW
Example: Rebooting to the BootLoader Screen and Automatically Installing Software
NEW
Example: Simple Engine Start/Stop Activity Program
NEW
Example: Simple Engine Start/Stop State Machine
Example: Machine Hours for Monochrome Displays
Example: Modifying the PV380 R2 - Adding a Resistive Input
Example: Time based Button Actions
Example: Converting IEEE-754 CAN data into Floating Point Data Type
Example: Scrolling Lists using List Binding
Example: Freeform CAN Variables Crossing Byte Boundaries
Example: Graph Widget with List Widget
Example: Blinking Indicator
Example: Keypad String Conversions to Numbers & ASCII Characters
Example: J1939 ASCII Engine Information (PGN 65242 & 65259)
Example: Analog Input Settings PV1200
Example: Time delayed Output
Example: Trig Functions - Sin, Cos, & Radians
Example: Machine Hours for Color Displays
Example: Sending CAN Messages Using Scripting
Example: CXM110 I/O Module Full Configuration
Example: Complete DM1 Diagnostic Message Pop-Up Functionality & Internal DM1 Messages
Example: Keypad using the Displays Physical Buttons
Example: Dynamic Gage Warning Zones
Example: CAN Data Logger
Example: Gage Smoothing (Data Averaging) on a PV380
Example: Digital Outputs with Annunciator
Example: Boot Logo vs Splash Screen Boot up Sequence
Example: Multipacket Broadcast Announce Message (BAM)
Example: Real Time Clock (RTC)
Example: Driving PVA Gauges
Example: Screen Wiper Control Using PDM and PV780