No drawings are available at this time.
- CE Declaration of Conformity
No application information is available at this time.
No media or tutorials are available at this time.
No accessory information is available at this time.
-
Interface:
- (12) LEDs: Status Indication
-
Operator controls:
- (5) Through Overlay Button switch
-
Power Supply:
- Operating Voltage: 9-35 VDC
- Standby Current: 1mA-4mA Typical
-
Inputs (7):
- (1) Digital Dedicated for Low Oil Pressure (active on Low)
- (1) Digital Dedicated for High Engine Temperature (active on Low)
- (1) Digital Dedicated for Remote Start (active on Low)
- (1) Digital Dedicated for DC charge fail/Alternator fail (active on Low)
- (2) Digital Auxiliary (active on Low)
- (1) Digital Dedicated for Remote Start (active on Low)
- (1) Frequency, supporting: Magnetic pickup (5-120VAC RMS / 0-10kHz) & AC frequency (30-600VAC RMS / 16-80 Hz)
- Outputs (7):
- (1) Low-side FET (-DC), 1A (Dedicated for Crank)
- (1) Low-side FET (-DC), 1A (Dedicated for Fuel/ECU Enable)
- (1) Low-side FET (-DC), 1A (Dedicated for Alternator Excite)
- (4) Low-side FET (-DC), 1A (Configurable, Auxiliary)
-
Communications:
- (1) CAN: J1939
- (1) RS485: Modbus RTU
- Physical/Environmental:
- Enclosure Material: UV stabilized black polycarbonate and epoxy encapsulation
- Dimensions (WxHxD): N/A
- IP rating: NEMA4 / IP65
- Relative Humidity: 0-100%, non-condensing
- Operating Temperature: -40° to +85°C (-40° to 185°F)
- Storage Temperature: -40° to +85°C (-40° to 185°F)
- Vibration: 6 Grms (5-2000 Hz), 3-axis random
- Shock: ±10G, 3-axis
Comments
0 comments
Please sign in to leave a comment.