WAI2 Panel With Warning for Mechanical Engines

Description

The WAI Panel is unique in that it has a 30 second warning alarm before shutdown allowing the operator to put the equipment in a safe condition before a shutdown occurs.

The panel is completely enclosed and monitors low oil pressure and  high coolant temperature sounding an audible alarm and illuminating a flashing lamp for 30 seconds before shutting the engine down when a fault condition is active. 

This is ideal for mobile equipment where an immediate shutdown is not desirable.

Specifications

• 12V and 24V models are available
• Illuminated gauges
• Low Oil Pressure Swichgage: 0-75 psi, 1/8" NPT connection
• High Engine Temperature Swichgage: 130-220° F, 72 inch capillary length , 1/2" NPT adapter
• 760AF-30 -X Time Delay Magnetic Switch provides up to 10 Amp energize to run output signal Note: Pin G must remain open for time delay before shutdown, see installation manual)
• TL2 Alarm Lamp
• FL3 Alarm Flasher
• SAH Audible Alarm

Literature Downloads