The highly cost effective HGC-2 is designed to control a generator driven by a hydraulic motor where speed is controlled by a proportional solenoid valve, either directly at the motor or as part of the pump compensator.
The HGC-2 is a closed loop controller that monitors the AC line voltage from the generator output for outer loop closure and provides the necessary current to a valve coil in order to maintain the desired generator frequency. The HGC-2 has a single LED indicator on the top of the unit to provide an overview of the operating status.
The unit has enough processing power and functionality when operating as a single control module to support a wide range of hydraulic generator applications. As with all of the HCT modules, the HGC-2 is packaged in a small rugged enclosure. All connectors are sealed and the module is encapsulated to withstand extreme conditions in the harsh mobile operating environment.
The HGC-2 is housed in a small, rugged housing and is fully encapsulated for maximum reliability. All I/O connections are made through a heavy duty industry standard 8-pin Deutsch connector.
|Function||Hydraulic Generator Controller||Closed loop controller that monitors the AC line voltage from the generator|
|Number of Coils||1 Single||600 mAmps, 1.2Amps or 2.5Amps - See Order Guide|
|Control Input||Frequency||100 to 250 VAC (RMS), 50/60Hz|
|Mating Connector Kit||P/N: 999-10073|
|Graphical User Interface (GUI)||P/N: 023-00228||Set-up & Diagnostic software - Free Download|
|HGC-2 Programming Cable||P/N: 999-10166||USB connection|
|Physical||94L x 94W x 13H mm||2 x # 8 Mounting screws|
|Mobile Equipment||IP67 (Module Only)||Solid potted|
|Temperature ºC||-40 to +75 Deg. C||Operating|
|Voltage||9 to 28 VDC||Reverse polarity protection and transient protection|
|Certifications||CE||Declaration of conformity|