Recommended Replacement - The uControl Family of mobile controllers is the recommended path to replace the DVC series which are no longer available due to parts obsolescence. The DVC uses custom application code created by each OEM which must be replicated by a developer to perform the same functions in the uControl mobile controller. This involves creating functional requirements, code development, and testing. To discuss your needs please contact one of our hydraulic controls partners listed in our Distributor List.
The DVC7 has been designed by HCT to be a powerful but cost effective subsystem controller. The module has the processing power and I/O functionality to support a wide range of hydraulic applications with the ability to control multiple directional and proportional valves. SAE J1939 CAN Bus communications are supported for added flexibility and should more I/O capability be needed multiple DVC7's can be successfully interconnected using this increasing popular communications protocol. The controller is packaged in the standard DVC series enclosure and fully encapsulated to withstand the fluid power harsh operating environments.
|Compliant with DVC System
|Universal Inputs (Digital/Analog/Pulse)
|0 to 20 mA / 0 to +5VDC, 0 to 8KHz. The three Digital Inputs may be configured as Pulse inputs for a total of 6 Pulse inputs, Quadrature Capable
|0 to +5V, 10-bit resolution
|Digital / Pulse Inputs
|All digital inputs are sinking inputs, 1 System Enable Configurable
|Proportional PWM Outputs
|2 Output Groups
|Auto-Range, 0 to 90 mAmps & 0 to 3.0 Amps. Configurable as 2 PWM, 2 HS + 1 PWM, 1 PWM + 1 HS or 2 HS outputs.
|3.0 Amps each (sourcing), short protected plus open protected
|5V @ 500 mAmps, used to drive joysticks, Potentiometers and Hall Effect Sensors, shorts protected
|CANBus, SAE J1939
|Can Bus 2.0B – This port is used to communicate with either other DVC modules or on the J1939 Bus.
|Programming Port and DVC61 (4 x 20 LCD) Display port
|Customer Programmable Software
|Intella® 10 Software Suite - Call for pricing
|Intella Software Program Loader
|Intella® 10 Program Loader Monitor (PLM) - Free Download
|User Programmable LED's, R/G
|Solid potted, 30-Pin Metri-Pack connector
|-40 to 85 Deg. C
|9.0 to 32 VDC
|Reverse polarity protection and transient protection
|Declaration of Conformity