Articles in this section

See more

MVP-R Series

Product Archive Notice

This page refers to older or legacy products that may be discontinued.

The sales and technical literature on this page are made available for download as a service to our customers. Archived documentation may contain telephone numbers and/or addresses that are no longer valid. Please refer to our Contact Us page for up-to-date contact information. Terms and conditions of sale stated in these documents, including warranty coverage, are subject to change.

The MVP Series is a line of proportional valve controllers each housed in an 18mm DIN connector body. Several versions are available for open and closed loop applications. Bright LED indicators provide an overview of the operating status. System configuration is accomplished through a clip-on infrared adapter, without removing or opening the connector body. All settings are stored in permanent memory within each unit. Each MVP controller is prewired and permanently sealed.

STANDARD MVP SERIES FEATURES:

  • Easily configured using the SAM software or our Hand Held Interface
  • LED indication of Status and Output Current
  • Permanently sealed, standard DIN 43650 Form A connector body
  • Adjustable current limited output with short circuit protection
  • All input and output limits are independently adjustable
  • Pre-wired industrial grade TPE cable
  • Microprocessor controlled for consistent, reliable performance

DOWNLOADS

The MVP-R is a ramping valve controller housed in an 18mm DIN connector body. The controller provides adjustable ramp times and current levels LED indicators on the module provide an overview of the operating status. System configuration is accomplished through a clip-on infrared adapter, without removing or opening the connector body. All settings are stored in permanent memory within the unit. The unit is prewired and permanently sealed.

APPLICATION INFORMATION:

    • Easily configured using the SAM software or our Hand Held Interface
    • LED indication of Status and Output Current
    • Standard, permanently sealed DIN 43650 Form A connector body
    • Selectable dither frequency up to 300 Hz
    • Adjustable current limited output with short circuit protection
    • Output limits are independently adjustable
    • Adjustable ramp up and ramp down times (RP1 has ramp up only)
    • Pre-wired 18 AWG TPE cable
    • Microprocessor controlled for consistent, reliable performance

OPERATING SPECIFICATIONS:

Item MVP-R
Supply Voltage 9 to 32VDC
Supply Current Isol + 20mA
Output Current "-06A" 600mA or "-12A" 1.2A or "-25A" 2.5A Maximum
Solenoid Resistance 2 Ohms Minimum
Reference Voltages +5V @ 2mA
Dither Settings Off, 30, 33, 38, 43, 50, 60, 75, 100, 150, 300 Hz
Ramp Time 0.0 to 120.0 Seconds
Analog Input Range "C1V"  0 to 10V, "C2A" 0 to 20mA
Analog Input Impedance 20 K Ohms
Operating Temperature Range -40 to +85 Deg. C
Enclosure Glass filled Polyamide
IP Rating IP67

 

PART NUMBERS:

Part Number Description
MVP-RP1-06A-10F Ramp Up Only, 600mA max output, 10ft cord
MVP-RP1-12A-10F Ramp Up Only, 1.2A max output, 10ft cord
MVP-RP1-25A-10F Ramp Up Only, 2.5A ;max output, 10ft cord
MVP-RP2-06A-10F Ramp Up/Down, 600mA max output, 10ft cord
MVP-RP2-12A-10F 0-10V input, 1.2A max output, 10ft cord
MVP-RP2-25A-10F 0-20mA input, 2.5A max output, 10ft cord

For custom cord lengths replace -10F with -xxF where xx = length in feet.

Related articles

Comments

0 comments

Please sign in to leave a comment.