Articles in this section

See more

EMS PRO Lite

  • Updated

Product Archive Notice

This page refers to older or legacy products that may be discontinued.

The sales and technical literature on this page are made available for download as a service to our customers. Archived documentation may contain telephone numbers and/or addresses that are no longer valid. Please refer to our Contact Us page for up-to-date contact information. Terms and conditions of sale stated in these documents, including warranty coverage, are subject to change.

  EMSPROLite.png

The EMS Pro Lite is a customizable pump controller designed specifically for dewatering and irrigation applications.

This versatile unit supports both mechanical and J1939 electronic engines, thus eliminating the need to stock multiple controllers. A step ahead, the EMS Pro Lite is Tier 4 and Stage IIIB/IV ready. This includes displaying the current urea level % on the LCD. A microprocessor-based controller, the EMS Pro Lite’s operating parameters are field adjustable without the need for a computer. However, the EMS Pro Lite can be modified for use with a remote modem or in a SCADA system with MODBUS* RTU protocols on either an RS232 or RS485 port. The robust EMS Pro Lite is engineered for 12 VDC systems (8 VDC minimum to 14.4 VDC maximum) and a wide operating temperature.

Literature

Drawings

Compliance Documents / Certificates

Application

Ordering Information

 
Part Number Model/Description
40700305 EMS Pro Lite
40000521 21-pin and 9-pin, 10 ft (3.048m) Whip Harness Kit for Mechanical Engines
40000522 9-pin, 10 ft (3.048m) Whip Harness for I/O
40000523 9-pin Connector Kit for I/O with terminals
40000524 21-pin and 9-pin Connector Kit with terminals
40000526 21-pin, 10 ft (3.048m) Whip Harness for Mechanical Engines
40000531 21-pin Connector Kit with terminals for engine connector

Specifications

  • Interface:
    • Display:
      • Monochrome LCD
      • 2.8 in./ 71.2 mm, (64 x 128 pixels)
    • (2) LEDs: yellow (warning) and red (shutdown)
  • Operator controls:
    • (8) button membrane switch
    • (1) Rotary key switch, Mode Auto/Off/Manual
    • (1) Push-switch (red), engine stop
    • (1) AGC Fuse, 10A
  • Power Supply:
    • Operating Voltage: 8-14.4 VDC
    • Standby Current: 220mA @12 VDC, 255mA @ 24VDC
  • Inputs (11):
    • (4) Digital, Program defined (active on High or Low)
    • (6) Analog, Program defined (4-20 mA, 0-5V, resistive or digital ground)
    • (1) Frequency, supporting: Magnetic pickup.(2.0 VAC-50 VAC RMS, 30-10kHz)
  •  Outputs (7):
    • (2) Relays, 2 SPDT (Reserved for Crank and Fuel/ECU Enable)
    • (2) High-side FET (+DC), 1A
    • (2) Low-side FET (-DC), 100mA
    • (1) Analog, 4-20mA or 0-5VDC
  • Communications:
    • (1) CAN: J1939
    • (1) RS485: Modbus RTU
    • (1) RS232: Modbus RTU
  • Connectors:
    • 21pin, Deutsch: HDP24-24-21PE
    • 9pin, Deutsch: HD10-9-96P-B025
  • Physical/Environmental:
    • Enclosure Material: Polycarbonate NEMA 4 (UL Certified)
    • Dimensions (WxHxD): 8.21 x 7.46 x 2.26 in. (208.7 x 189.7 x 57.5 mm)
    • IP rating: IP65
    • Relative Humidity: 95%RH @ 60°C
    • Operating Temperature: -40° to +80°C (-40° to 176°F)
    • Storage Temperature: -40° to +80°C (-40° to 176°F)
    • Mounting: 4 isolated .75 inch rubber shock mounts
    • Shipping Weight: 7lbs. (3.2 kg.)
    • Shipping Dimensions: 12 x 12 x 10 in. (304.8 x 304.8 x 254 mm.)

Related articles

Comments

0 comments

Please sign in to leave a comment.