Recommended Replacement - The uControl Family of mobile controllers is the recommended path to replace the DVC series which are no longer available due to parts obsolescence. The DVC uses custom application code created by each OEM which must be replicated by a developer to perform the same functions in the uControl mobile controller. This involves creating functional requirements, code development, and testing. To discuss your needs please contact one of our hydraulic controls partners listed in our Distributor List.
The DVC750 expansion module is a multi-I/O unit designed to operate in conjunction with a DVC710 master controller module. The large number of additional, individually configurable inputs and outputs make it ideal for more complex applications that need additional operator interface and multi-coil drive capabilities. Several +5VDC regulated user voltages are also provided at the connector to supply power to external sensors or local command sources. To aide programming and make wiring simplified, the input and output groups are the same as the DVC710. The DVC750 communicates with the DVC710 controller through the HCT CAN Bus (high-speed communication) and utilizes a separate RS-232 port for programming, updates, monitoring, diagnostics and features such as setting the MAC ID (node) number e.t.c. The controller is packaged in the standard DVC series enclosure and fully encapsulated to withstand the fluid power harsh operating environments.
|Function||System Expansion Module||DVC710 System Expansion module|
|Universal Inputs (Digital/Analog/Pulse)||2||0 to +5VDC|
|Analog Inputs||4||0 to +5V, 10-bit resolution|
|Digital Inputs||8||All digital inputs are sinking inputs|
|Proportional PWM Outputs||3 Output Groups||0 to 90 mAmps & 0 to 3.0 Amps, consult factory for Apitech or Danfoss configurations. Configurable as 3 PWM, 2 HS + 1 PWM, 1 PWM + 1 HS or 2 HS outputs.|
|Digital Outputs||6 HS||3.0 Amps each (sourcing), short protected plus open protected|
|CANBus, SAE J1939||1||HCTCan|
|RS232||1||Program Monitoring Port|
|Customer Programmable Software||P/N: 998-00009||Intella® 700 Software Suite|
|Intella Software Program Loader||P/N: 023-000245||Intella® 700 Program Loader Monitor (PLM)|
|Status Indicators||19||User Programmable LED's|
|Mobile Equipment||IP68||Solid potted, 18 & 30-Pin Metri-Pack connector|
|Temperature ºC||-40 to 85 Deg. C||Operating|
|Voltage||9.0 to 32 VDC||Reverse polarity protection and transient protection|