Recommended Replacement - We recommend using Sun Hydraulics XMD Valve Controller which can be configured using their easy to use mobile app that communicates to the XMD over Bluetooth or desktop configuration tool. Please contact one of our Hydraulic Controls Partners in your region for pricing and availability.
EPC-2, DUAL CHANNEL PUMP CONTROLLER GUI SOFTWARE FEATURES:
This pre-written PC based graphical user interface ( GUI ) and corresponding application software allows the user to connect, calibrate and immediately use two separate input and output channels in one controller, making it ideal and very cost effective for open loop valve control or directional proportional control solutions.
The controller operates from a wide supply range of 10 to 32VDC so this one unit can interface with any OEM coils of either 12VDC or 24VDC with a current requirement of up to 3 Amps per coil. The GUI is designed around three easy to navigate pages where page 1 is the 'Dashboard' giving a real time overview of the controller health and input/output state. Page 2 allows the user to quick-configure the type of command required, choosing from DC Volts (0 to +5V) or Current ( 4 to 20mA ) and also select single or dual coil output configuration. And page 3 shows all the other necessary adjustments that will be needed to individually set-up and optimize each channel, including Min & Max coil currents, UP/DOWN ramp times and dither amplitude / frequencies etc.
EPC-2 PRODUCT FEATURES:
|Pre-Packaged Pump Controller for Off-road Mobile Applications||Dual Chanel Open Loop Pump Controller|
|Analog Inputs||2||0 to +5V or 0 to 20mA|
|2x On/Off, 0V to +V power supply (Max) with 1x additional Enable On/Off switch|
|Proportional Outputs||4||2x PWM output groups, 0 to 3.0 Amps|
|Digital Outputs||2||On/Off, 0 to 3.0 Amps; 0V to +V power supply -0.5VDC|
evc-2 Programming Cable
|RS232 serial cable (use with P/N: 108-00119, USB to RS232 converter for USB ports)|
|Graphical User Interface (GUI)||P/N: 023-00244||evc-2 GUI - Free Download (16.56 Mb)|
|Program Loader Monitor||P/N: 023-00245||Program loader monitor (PLM) - Free Download|
|NEMA/IP Rating||6P/IP68||Solid Potted - derated for connector as required|
|Temperature ºC||-40 to +85 Deg. C||Operating|
|Voltage||9.0 to 32 VDC||Reverse polarity protection and transient protection|
|Certifications||CE||Declaration of Conformity|