Recommended Replacement - The uControl Family of mobile controllers is the recommended path to replace the DVC series which are no longer available due to parts obsolescence. The DVC uses custom application code created by each OEM which must be replicated by a developer to perform the same functions in the uControl mobile controller. This involves creating functional requirements, code development, and testing. To discuss your needs please contact one of our hydraulic controls partners listed in our Distributor List.
The DVC10 Master Module is the main control module for all DVC series modules. It has a large number of inputs and outputs to work as a stand-alone unit or it can be the main module for a large CAN Bus system with up to 16 DVC expansion modules. An RS-232 port is used for programming, monitoring and driving an external display. Use with the following expansion modules (DVC21, DVC22, DVC41, DVC50, DVC61 & DVC80.
|Function||System Controller Module||Master controller for DVC System|
|Universal Inputs (Digital/Analog/Pulse)||3||0 to 20 mA, 0 to +5VDC, 0 to +10VDC, -1 to +1VDC. The three Digital Inputs may be configured as Pulse inputs for a total of 6 Pulse inputs, Quadrature Capable|
|Analog Inputs||3||0 to +5V, 10-bit resolution|
|Digital Inputs||8||All digital inputs are sinking inputs|
|Proportional PWM Outputs||3 Output Groups||0 to 90 mAmps & 0 to 3.0 Amps, consult factory for Apitech or Danfoss configurations. Configurable as 3 PWM, 2 HS + 1 PWM, 1 PWM + 1 HS or 2 HS outputs.|
|Digital Outputs||6 HS||3.0 Amps each (sourcing), short protected plus open protected|
|CANBus, SAE J1939||1||Can Bus 2.0B – This port is used to communicate with either other DVC modules or on the J1939 Bus.|
|RS232||1||Programming Port and DVC61 (4 x 20 LCD) Display port|
|Customer Programmable Software||P/N: 998-00003||Intella® 10 Software Suite - Call for pricing|
|Intella Software Program Loader||P/N: 023-00154||Intella® 10 Program Loader Monitor (PLM) - Free Download|
|Status Indicators||21||User Programmable LED's|
|Mobile Equipment||IP68||Solid potted, 18 & 30-Pin Metri-Pack connector|
|Temperature ºC||-40 to 85 Deg. C||Operating|
|Voltage||9.0 to 32 VDC||Reverse polarity protection and transient protection|
DVC10 EXAMPLE CODE:
Please sign in to leave a comment.