Recommended Replacement - The uControl Family of mobile controllers is the recommended path to replace the DVC series which are no longer available due to parts obsolescence. The DVC uses custom application code created by each OEM which must be replicated by a developer to perform the same functions in the uControl mobile controller. This involves creating functional requirements, code development, and testing. To discuss your needs please contact one of our hydraulic controls partners listed in our Distributor List.
The DVC710 is a robust programmable controller for solenoid-operated proportional valves. It is uniquely designed with configurable I/O and two CAN communication ports. Its powerful combination of capabilities makes this controller well suited for stand-alone applications or to be utilized as a system master controller when combined with the DVC700 series expansion modules.
|700 Series system Controller Module
|Master controller for DVC700 System
|Universal Inputs (Digital/Analog/Pulse)
|0 to 20 mA, 0 to +5VDC, 0 to +10VDC, -1 to +1VDC. PWM% configurable, 30Hz to 1.5 KHz.
|0 to +5V, 10-bit resolution
|All digital inputs are sinking inputs
|Proportional PWM Output's
|3 Output Groups
|Auto-Range, 0 to 3.0 Amps. Configurable to automatically work with the digital outputs for a variety of valve configurations. Up to 3 dual coil valves or 9 digital valves.
|3.0 Amps each (sourcing), short protected plus open protected
|CANBus, SAE J1939
|Can Bus 2.0B – This port is used to communicate with either other DVC modules or on the J1939 Bus.
|Programming Port and DVC61 (4 x 20 LCD) Display port
|Mating Connector Kit
|Customer Programmable Software
|Intella® 700 Software Suite
|Intella Software Program Loader
|Intella® 700 Program Loader Monitor (PLM)
|3 system controlled status indicators and 1 user programmable status LED.
|Solid potted, 18 & 30-Pin Metri-Pack connector
|-40 to 85 Deg. C
|9.0 to 32 VDC
|Reverse polarity protection and transient protection
|Declaration of Conformity