Program Loader Monitor (PLM) for DVC700

DVC710 PROGRAM LOADER MONITOR SOFTWARE FEATURES:

The Program Loader Monitor (PLM) is the user interface to download programs to the DVC710 and to display information from all of the DVC modules connected together.  Data from a DVC expansion module (i.e. DVC722, DVC741, DVC61, etc.) is transmitted through the DVC710 to the PLM.

The PLM is also the tool to analyze, monitor and modify I/O parameters such as Ramps, Dither and other I/O settings during commissioning.  However these changes are only stored in RAM and need to be saved to a file, imported into the application, re-compiled via the Programming Tool (PT) and then downloaded into the DVC via the PLM to make the changes permanent.  An application can be created in such a way using EEMemory to allow these I/O settings to be permanent without using the PT.

All applications are created and/or modified using the PT, then downloaded into the DVC and fine tuned via the PLM. 

DOWNLOAD A FREE COPY OF THE PROGRAM LOADER MONITOR FOR YOUR USE;

System Requirements: 
Download Size:         119 Mb
OS:                          Windows XP Professional, Windows Vista Business or Ultimate, Windows 7-32 or 64
PC with Serial Port:   For USB ports you need a USB to RS232 converter (i.e. Dongle)
Communication:        RS-232 Serial cable P/N: 999-10075

Download & installation instructions:

1. Click here to download.
2. Save the zip file to a temporary file location on your computer.
3. Unzip ("Extract All") the files to your temporary location.
4. Run the SETUP.EXE file, and click finish to complete the installation.
5. The Demo version of the Intella Suite will only work in Simulation Mode (will not drive any outputs) and requires a DVC710 connected to run the Simulator. 

Other Downloads:

• Data Sheet
• User Manual
• TekBook
• Code Examples
• Program Variables
• FAQ's