Recommended Replacement - The uControl Family of mobile controllers is the recommended path to replace the DVC series which are no longer available due to parts obsolescence. The DVC uses custom application code created by each OEM which must be replicated by a developer to perform the same functions in the uControl mobile controller. This involves creating functional requirements, code development, and testing. To discuss your needs please contact one of our hydraulic controls partners listed in our Distributor List.
The DVC725 is a robust input expansion controller that receives 40 discreet inputs (ON / OFF) for hydraulic control systems. It is designed to be used as an input expansion module for the DVC700 series controllers or as a stand-alone input module using direct CAN bus communication.
| Item | DVC725 | Description |
|---|---|---|
| Function | 700 Series system Controller Module | Expansion Module to the DVC710 or DVC707 Master Controllers |
| Digital Inputs | 40 | All digital inputs are sinking inputs |
| CANBus, SAE J1939 | 1 | Can Bus 2.0B – This port is used to communicate with either other DVC modules or on the J1939 Bus. |
| RS232 | 1 | Programming Port |
| Mating Connector Kit | ||
| Customer Programmable Software | P/N: 998-00009 | Intella® 700 Software Suite |
| Intella Software Program Loader | P/N: 023-000245 | Intella® 700 Program Loader Monitor (PLM) |
| Status Indicators | 4 | 3 system controlled status indicators and 1 user programmable status LED. |
| Mobile Equipment | IP67, 69K | Solid potted, 18 & 30-Pin Metri-Pack connector |
| Temperature ºC | -40 to 85 Deg. C | Operating |
| Voltage | 9.0 to 32 VDC | Reverse polarity protection and transient protection |
| Certifications | CE | *Certificate available upon request |
Downloads:
Comments
0 comments
Please sign in to leave a comment.