PowerView® PVA Gauges (J1939 CAN/MurphyLink)

• Solid Models
  • PVA20 & PVA35
    • PVA20 & PVA35 IGS
    • PVA20 & PVA35 STEP
  • PVAA20BB
    • .IGS
    • .STEP

No compliance documents or certificates are available at this time.

No application information is available at this time.

No application information is available at this time.

No media or tutorials are available at this time.

• PVA/PV101 Wiring Harness Accessories (03020)

• Power Supply Input: 12/24V (8-32VDC min/max voltage)
• Power Supply Operating Current: (@ 14VDC) =
• PVA20, PVA35: 28 mA minimum: 52 mA maximum
• PVAA20: 19 ma minimum; 46 mA maximum
• Backlight Maximum Current: 24 mA (Not valid for PVAA20)
• Input: RS485 MODBUS RTU Data
• Output: Analog readout
• Operating Temperature: -40°F to 185°F (-40°C to 85°C)
• Storage Temperature: -76°F to 185°F (-60°C to 85°C)
• Dial: White text over black background
• Indicating Pointer: Stepper motor Operation with 270° sweep
• Gage Accuracy: Better than ± 1% of full scale
• Environmentally Sealed Enclosure:
• Sealing: IP68, ±5 psi (±34.4 kPa)
• Case Materials: Polycarbonate/Polyester (PC+PBT)
• Clamp Materials: Polyester (PBT)
• Lens Material: Polycarbonate
• Bezel Material: ABS
• Maximum Panel Thickness: 3/8 inch (9.6mm)
• Connectors: 6-pin Deutsch DT06 Series

 The following items apply only to PVAA20

• Sound Output Level: 90 dB @ 30cm
• Relay Rated Load: 0.5A, 125VAC: 1A, 24VDC
• Relay Maximum Switching Capacity: 62.5VA, 30W
• External Audible Alarm Output: 28VDC, 30 mA maximum current sink
• Temporary Silence Button: Charge transfer technology