PVS-5 (J1939 CAN/MurphyLink)

Provides 5 Volt power supply to PVM gages Capable of supplying power to a maximum of 6 PVM gages Enables PVM gage compatibility with existing MurphyLink products Easy mounting and installation

External power is required to make the PVM gage line compatible with existing MurphyLink products, such as PV1000, Cascade, iGuard and eGuard. The PVS-5 power supply device supplies 5 volts of external power and load dump protection for up to 6 PVM gages. The maximum length of the power and data connection between gages is 0.5 meters (8.5 meters total).

The unit may be installed inside a panel or behind a dash.

Specifications

• Input Voltage:
  • 6 VDC minimum to 32 VDC maximum
  • 12/24 VDC nominal

• Output Voltage: 5 VDC @ 450 mA maximum
• Reverse Polarity Protection: -36 VDC and above
• Overcurrent Protection: 600 mA @ 36 VDA maximum
• Connector: AMP 1-770968-1
• Operating Temperature: -40° to 185° F (-40° to 85° C)
• Storage Temperature: -40° to 221° F (-40° to 105° C)
• Random Vibration: 5-2000 Hz
• Operating Shock: 50G
• Certification: CE
• Case Material: Polyamide
• Dimensions: 2 x 2 x .75”
• Mounting Hole Dimensions: Two #8 screws, 1.625” offset