PV450 bootloader / firmware update

Follow

antonio

• February 25, 2019 15:52

I have some PV450 rev-E with bootloader 2.2.10011. This bootloader does not allow you to load in any way applications developed after PowerVision version 2.3.
Is it possible to update the bootloader / firmware?
I tried to generate full-install with version 2.6 to 2.9 but without result.

Thank you,

0

• 

  Justin Eldridge

  • February 25, 2019 18:41

  I haven't tried this myself but this button looks promising

  

  0

  Comment actions Permalink
• 

  antonio

  • February 26, 2019 08:33

  Thanks for your advice.

  I tried to load the new bootloader but the load stops at 5% and the terminal reboots.

  0

  Comment actions Permalink
• 

  Justin Eldridge

  • February 26, 2019 21:23

  I found this in the download archives.

  https://support.enovationcontrols.com/hc/en-us/articles/360006339854-PowerVision-Configuration-Studio-Version-Archive

  http://www.enovationcontrols.com/uploaded/software/PowerVisionReliabilityFieldDeviceInstaller.zip

  I believe this will flash the bootloader to 2.3

   

  0

  Comment actions Permalink
• 

  antonio

  • February 27, 2019 08:22

  Thanks Justin,
  I was able to update the bootloader to 2.3 with the Field Upgrade Utility using the Emergency Update procedure (direct USB connection to the PC).
  Thanks again,

   

  0

  Comment actions Permalink

Please sign in to leave a comment.