Assigning Hard Key Navigation
To program a hard key within PowerVision, in the Page Designer Tab, click on the:
The Edit Key Behaviors window will appear, and you will be able to assign that key to:
- Not Mapped
- Disabled
- Fire an Event
- Go to a View
Similar to Hard Key Navigation, if you are working with a display that has touch capabilities, you can program touch navigation to the configuration by:
- Changing a particular gauge or widget’s properties under Touch Actions in the propers bar
- Using a Touch Widget from the Toolbox
By using the Touch Widget you have more control over the placement and properties of the touch area. This is helpful when dealing with small areas and layers.
Select Key 1 and the Edit Key Behavior - Key 1 window will appear
For Key Down, Select Fire Event and choose, CE Toggle Day/Night
Select Key 2 and the Edit Key Behavior - Key 2 window will appear
For Key Down, Select Fire Event and choose, CE Toggle SimData
Create and Load your configuration to test.
When accessing the Basic Page Designer Page:
- Pressing Key 1 will Toggle Day and Night viewing modes
- Pressing Key 2 will turn simulation mode on and off