Murphy CONNECT Telematics Unit

• Quick Setup Guide
  • Quick Setup Guide (PDF)
• Current Manuals
  • Installation Manual (00-02-1150)
  • Operations Manual (00-02-1165)

Current CONNECT Software Version: 1.00.8

No drawings are available at this time.

No compliance documents or certificates are available at this time.

No application information is available at this time.

No application information is available at this time.

No accessory information is available at this time.

• Electrical
  
  • Operating Voltage: 9-36 VDC, reverse polarity protected
  • Max Voltage: -40 to +60 VDC
  • Power Consumption:
    
    • 12 VDC:
      
      • Transmitting: 265mA
      • Idle: 135mA
      • Off: 0.5mA (Using IGN to turn off)
      • On: ~175mA Average
    • 24 VDC:
      
      • Transmitting: 135mA
      • Idle: 90mA
      • Off: 0.5mA (Using IGN to turn off)
      • On: ~115mA Average
• Communications:
  
  • CAN: (1) J1939 (Future use)
  • RS485: Modbus RTU
  • Wi-Fi: 2.4GHz 802.11 b/g/n (Troubleshooting)
  • Cellular: LTE Verizon Network (Allow up to 24hrs for SIM activation once equipment is moved to a site - Only for new activation.)
  • GPS Location Services
• Connection:
  • CONNECT Connector: Amphenol AT06-08S
  • Mating Connector: Amphenol AT04-08PA or Deutsch DT04-08PA
• Inputs (1):
• Digital: (Future use) [Shared with digital output]
• Outputs (1):
  
  • Digital: (Future use) [Shared with digital input]
• Environmental:
  
  • Operating Temperature: -30˚C to +80˚C (-22˚F to +176˚F)
  • Storage Temperature: -30˚C to +80˚C (-22˚F to +176˚F)
  • Protection: IP67
  • Vibration: Random vibration, 8.17 gRMS (5-2000 Hz), in 3 axes
    
    • Specification was met without the use of rubber isolation mounts
  • Shock: 25g in 3 axes
    
    • Specification was met without the use of rubber isolation mounts