<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<ConfigurationInfo version="2.9.21075">
  <Guid>f2031c09-e4b0-4bfa-bf3d-26f53d8d4fe6</Guid>
  <IgnoreInBinaryFormats>False</IgnoreInBinaryFormats>
  <ExternalKey />
  <ConfigurationName>Example - PDM Resistive Inputs Analog 1and 2</ConfigurationName>
  <ConfigurationVersion>2.9.21075</ConfigurationVersion>
  <ConfigurationDescription>The IX3212 PDM Analog Inputs 1 &amp; 2 are designated for resistive input use.
The input is pulled high to 5Vdc through a 2.21k ohm resistor.
The voltage into the A/D converetr is just the ratio Vad = 5V (Rin/(Rin + 2210 ohms))
When using the PDM App in Powervision thre result is given in Vdc, to convert back into resistance use the equation below.

Rin = 2210(1/(5V/Vad - 1))
Rin = input resistane
Vad = Analog input voltage from the IX3212 App

A sript routine is used to convert the resistance to a fuel level as an example of using lookup tables with interpolation to convert non-linear resistance data to units of measurement.

All the programing elements for this example can be found in the IX3212 PDM Manager folder
</ConfigurationDescription>
  <DeviceName>PV780</DeviceName>
  <FileName>C:\Users\ecarmen\Documents\Murphy Configurations\Version 2.9\DBs\Example - PDM Resistive Inputs Analog 1and 2.murphyConfig</FileName>
  <TcpipSetupData>
    <Guid>7ff11d9f-69e8-49e8-888f-e06a5d973a83</Guid>
    <IgnoreInBinaryFormats>False</IgnoreInBinaryFormats>
    <ExternalKey />
    <ConfigUseDiscovery>True</ConfigUseDiscovery>
    <ConfigUseAutoIPDiscoveryAddress>True</ConfigUseAutoIPDiscoveryAddress>
    <ConfigIPAddress>192.168.0.2</ConfigIPAddress>
    <ConfigSubnetMask>255.255.255.0</ConfigSubnetMask>
  </TcpipSetupData>
  <ModelLockingEnabled>False</ModelLockingEnabled>
  <PasswordLockingEnabled>False</PasswordLockingEnabled>
  <PasswordBytes></PasswordBytes>
  <UniqueIdentifier>H5q+9LecQEC2479om5fCOwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA=</UniqueIdentifier>
  <LoaderVersion />
  <ModelNumberBytes>WMBtKs4WccLYuUPlfD4IAY95GWzOk6WQru6yEYd+PMbQgZ+Ja7Tfq+C7YU7+V051TwxIwHgaYyOkF+i5lSluuoi+Kiz4c9hI2TCkqW/S2iEKnHR8FH5ptg6jc2bXY2irZi0fJcSEWZRMwzTzzn7Pu4t4lRsjtvGpc0ZTnMcrA0k=</ModelNumberBytes>
  <Password />
  <ModelNumber>Any</ModelNumber>
  <DeviceFamily>HV700</DeviceFamily>
  <CANSetupData>
    <Guid>c7eb4d2a-1277-4a00-9e6d-ae83ca3f1ecc</Guid>
    <IgnoreInBinaryFormats>False</IgnoreInBinaryFormats>
    <ExternalKey />
    <CCPStationAddress>0</CCPStationAddress>
  </CANSetupData>
  <ConfigurationIdentifier>Murphy Standard PV780</ConfigurationIdentifier>
  <SerialNumber />
  <BootCount>0</BootCount>
  <PartNumber />
  <MacAddress />
</ConfigurationInfo>